From carbon cost to carbon value.

Aethera is a modular platform, built into standard containers, that captures CO2 at industrial sites and turns it into products, data and revenue. Engineered in Norway for heavy industry everywhere.

2027First pilots Pilot programme in preparation One outside Europe, one in Europe, then Norway. Stay tuned for the first site.

Carbon is now a cost industry cannot avoid.

Emitting CO2 in Europe has a price, and it keeps rising. The tools to cut it are either energy-intensive, expensive or slow to build.

€82per tonne

The EU carbon price

Forecasts point to €126 or more by 2030, and importers start paying through CBAM certificates from 2027.

2.5+GJ per tonne

The energy penalty of amine capture

Conventional solvents regenerate at 120 to 150 °C. Direct air capture still costs more than €500 per tonne.

6–12months

To build a fixed capture plant

Each one is engineered site by site. Too slow and too heavy for the thousands of emitters that need a solution.

Nothing on the market today is low-energy, quick to deploy and pays for itself. That is the gap Aethera is built to fill.

EU allowance price from S&P Global, 5 October 2026. Forecast and cost figures are industry estimates.

We are not building a better plane. We are going to Mars.

The plane

Today’s capture

Capture, compress, bury. Proven, but it flies the same route every day and CO2 stays a cost.

The Moon

Next-generation capture

Better sorbents and direct air capture. A real leap, for one function.

Mars and beyond

Aethera

Capture, conversion, AI and data in one modular platform. CO2 becomes products, revenue and insight.

Seven modules. One containerised platform.

Each module is a standard shipping container with one job. Together they take flue gas in and send finished products out. A site can also take only the modules it needs.

    Guided tour

    Modular

    Plug-together containers. Deploy all of the modules, or only the ones a site needs.

    Profitable

    Captured CO2 becomes products and data, not only an avoided cost.

    Intelligent

    Every unit learns, and each one makes the rest of the fleet better.

    Three MOFs. One cassette. Run on waste heat.

    The heart of Aethera is a capture cassette that layers three different metal-organic frameworks. It holds on to CO2 and lets it go again with low-grade heat the site already throws away.

    What is a metal-organic framework?

    A MOF is a crystal built like scaffolding at the scale of molecules: metal joints held together by organic struts. The structure is mostly empty space, so a single gram can have the inner surface area of a football pitch, and the pores can be tuned to attract one molecule over another.

    No single MOF gives high capacity, moisture tolerance and low-energy release at the same time. Stacked in the right order, three of them can. CO2 is held by physical adsorption, not amine chemistry, which is why it lets go at lower temperatures.

    CO2 N2 Water NOx and SOx Simplified, not to scale
    >92%
    CO2 capture from suitable industrial flue gas
    >99.9%
    Purity of the CO2 stream
    ~1.8 GJ/t
    Energy per tonne captured
    10,000+
    Cycles per cassette
    How Aethera's design targets compare with conventional capture
    Amine solventDirect air captureAethera target
    Release temperature120–150 °Cabout 100 °C80–120 °C
    Energy per tonne2.5+ GJ10+ GJ~1.8 GJ
    Capture rateabout 90%85%+>92%
    Time to install6–12 months, fixed plantMonths, fixed plant4–18 weeks per series unit
    Captured CO2A cost to storeA cost to storeFeedstock for products

    Aethera figures are design targets for the integrated system, not measured results. They will be validated in the 2027 pilots. Comparison figures are indicative, from public sources.

    Three stages from CO2 to product.

    AetheraBio is a staged reactor. Microorganisms do the first and hardest part of the work at mild temperatures, and catalysts finish it. Which product comes out is chosen for each site.

    What is bioconversion?

    Some microorganisms live on CO2. Like plants, they use it as their source of carbon and build it into larger molecules. Unlike a field of crops, they do it in a closed tank, around the clock, with no land and no weather.

    Catalysts then do what biology does slowly or not at all: they reshape those molecules into exactly the product a buyer wants. Splitting the work into stages lets each step run at its own best conditions, so the same module can be tuned for fuels at one site and materials at another.

    CO2 Microorganism Carbon chain Product Simplified, not to scale

    A simplified picture of the conversion principle. Organisms, catalysts and product routes are selected for each site during engineering.

    Pressure and vibration, turned into power and data.

    Compressing CO2 creates pressure pulses and vibration, and that energy is normally lost. Aethera puts piezoelectric components where it happens, to recover part of it and to sense what goes on inside the pipes.

    What is the piezoelectric effect?

    Some crystals and ceramics produce a voltage when they are squeezed, and change shape slightly when a voltage is applied to them. The effect is long proven. It is what sparks a gas lighter and keeps time in a quartz watch.

    Inside the crystal, positive and negative charges normally sit in balance. Squeeze it and they shift apart, so one face turns positive and the other negative. Connect the two faces and a current flows.

    Hold the button, or press on the crystal, and watch the meter. Simplified, not to scale

    Piezoelectric energy recovery, sensing and actuation are part of the Aethera design and will be validated in the pilots.

    Three sizes. The same containers, replicated.

    Scale comes from adding standard trains of containers, not from engineering a new plant. Every size shares one digital layer.

    Small

    3,500t CO2 a year
    Build
    6–9 process containers and an edge data centre in the first pilots. Once commercial, a unit can be as small as one closed-loop container.
    Install
    4–6 weeks, series unit
    Suits
    Ships, waste-to-energy, distributed industry, pilots

    Medium

    22,000t CO2 a year
    Build
    Parallel trains, shared digital layer
    Install
    8–12 weeks, series unit
    Suits
    Cement, refining, mid-scale petrochemicals

    Large

    85,000t CO2 a year
    Build
    Massed trains, optimised as one fleet
    Install
    12–18 weeks, series unit
    Suits
    Petrochemicals, offshore oil and gas, steel

    Install times assume series units and a mature supply chain. The first pilots are first-of-a-kind and take longer.

    Size it for your site

    Move the slider to your site’s yearly CO2 emissions and see roughly what an Aethera installation would look like.

    150,000tonnes CO2
    CO2 captured each year at the >92% target
    138,000 t
    Suggested installation
    1 Large, 2 Medium, 3 Small
    Same as the yearly CO2 from
    30,000 carsat 4.6 t per car a year

    Illustrative only. Based on design targets and standard sizes. A real installation is sized during front-end engineering, from the site’s gas composition, heat and space. Car figure from the US EPA.

    What captured CO2 can become.

    Captured CO2 is a raw material. Which products a site makes is chosen during engineering, from local demand, energy prices and buyers.

    Chemicals and fuels

    Near term

    • e-Methanol€450–900 / tShipping fuel, and a building block for plastics and chemicals.
    • e-Kerosene (SAF)€1,500–3,000 / tSustainable aviation fuel that blends into ordinary jet fuel.
    • CO2-based polyols€1,800–2,800 / tIngredients for foams, coatings and adhesives, with CO2 in place of oil.

    Bulk and strategic

    Volume

    • CO2-cured concrete€40–180 / tCO2 mineralised into concrete, where it stays locked away.
    • Greenhouse-grade CO2€100–250 / tClean CO2 that helps greenhouse crops grow.
    • Lithium carbonate€18,000–35,000 / tA battery raw material, precipitated with CO2.

    Specialty carbon

    Long-term upside

    • Graphene nanoplatelets€250–1,500 / kgUltra-thin carbon for stronger composites and conductive coatings.
    • Multi-wall carbon nanotubes€100–500 / kgA conductive additive for batteries, plastics and electronics.
    • Battery-grade carbon€6,000–16,000 / tAnode and conductive materials for battery makers.

    Prices are indicative market ranges, not NorthShield offers. Also possible: urea, bioplastics, biomethane, synthetic graphite and sodium carbonate.

    Built for every heavy emitter.

    The same containers serve very different industries. What changes is which modules a site takes, and how many.

    Cement and lime

    Process CO2 that cannot be designed out, and a steady flue-gas stream.

    Full loop, medium to large

    Waste-to-energy

    Urban incinerators with heat on site and local buyers for products.

    Full loop, small to medium

    Oil and gas fields

    Onshore and offshore, close to storage and facing rising CO2 costs.

    Capture or full loop, large

    Ships and maritime

    Containerised units on board and in port, ahead of IMO rules for onboard capture.

    Capture only, small

    Steel and metals

    High-volume off-gas and strong demand for low-carbon steel.

    Full loop, large

    Refining and chemicals

    Sites that already capture CO2 can plug straight into our conversion modules.

    Conversion only, medium to large

    Also hydrogen, bioenergy, pulp and paper, greenhouses and CO2 hubs.

    Every unit learns.

    Each Aethera system ships with its own edge data centre. From the first pilot onward, the fleet builds a record of how capture and conversion behave across sites, gases and seasons.

    Better unitsLower energy and cost per tonne as the fleet grows.
    Verified recordsCapture and conversion data good enough for carbon credits.
    Materials dataHow sorbents and cassettes age over thousands of cycles.
    Trained modelsControl and maintenance models for operators and equipment makers.

    Sensors on every module

    Gas composition, heat, pressure, vibration and biology, measured continuously.

    Edge data centre

    An on-site container for real-time control and local AI. Process data stays secure on site.

    AetheraMind

    Software that learns across the whole fleet: optimisation, predictive maintenance and smarter start-ups for every new site.

    First pilots in 2027.

    Two pilot sites are in preparation, and we are aiming for a third in Norway. Each one puts a complete Aethera system on a working industrial site and runs it long enough to prove it in the field.

    • Pilot 1 Outside EuropeIn preparationLead site, developed with a local route-to-market partner.
    • Pilot 2 In EuropeIn preparationSecond site, anchored in a university research ecosystem.
    • Pilot 3 NorwayIn planningOur aim for the third site, within Norway’s carbon capture and storage ecosystem.
    OsloHeadquarters
    Pilot sites are announced when they are confirmed.
    6–9
    Process containers per pilot
    1
    Edge data-centre container
    ~4,000
    Operating hours of field data
    >92%
    Capture target to prove on site

    From first pilot to fleet.

    The first unit is the most expensive one we will ever build. Everything after it reuses the same engineering.

    1. 2026Now

      Seed round and founding team

      Close the seed round, complete the founding team and sign pilot partners.

    2. 2028–29

      Series manufacturing

      Standard containers in volume, in-house MOF cassettes, first component and data revenue.

    3. 2030

      Pilot programme complete

      More than 4,000 operating hours per pilot, then full commercial roll-out.

    4. 2031–36

      Fleet scale

      Hundreds of units across heavy industry, with a target cost of €55–85 per tonne before product revenue.

    Engineered in Norway.

    NorthShield Group was founded in Oslo in 2025 to make carbon capture pay for itself. We build on Norway’s offshore and process-industry engineering tradition, and on dialogue with researchers in Norway and the UK, to turn proven components into one integrated platform.

    Every performance figure on this site is a design target until our pilots measure it. We would rather show you the data than the adjectives.

    We are building the founding team

    If you have built hard things in process engineering, materials science, controls or industrial software, we want to hear from you.

    • Process engineering
    • MOFs and materials science
    • Controls and automation
    • Industrial software and AI
    • Commercial and partnerships

    Introduce yourself

    Founded
    2025
    Headquarters
    Oslo, Norway
    Focus
    Carbon capture and utilisation for heavy industry
    Platform
    Aethera
    Stage
    Seed, with first pilots in 2027
    Pilot regions
    One outside Europe, one in Europe, then Norway
    Every process module ships in a standard 40-foot container, so it travels by road, rail and sea like any other cargo.

    Let’s build this together.

    Whether you run an industrial site, invest in climate infrastructure, buy low-carbon products or research this field, we would like to hear from you.

    • Industrial sitesExplore a pilot or a future installation.
    • InvestorsOur seed round and pilot co-funding.
    • Product buyersConditional agreements for future volumes.
    • ResearchersSorbents, conversion and process data.